BMW 5 Series: Memory function
Concept
The following settings can be stored and, if necessary, retrieved using the memory function:
- Seat position.
- Exterior mirror position.
- Steering wheel position.
- Height of the Head-up Display.
General information
Two memory locations with different settings can be set for each driver profile.
The following settings are not stored:
- Backrest width.
- Lumbar support.
Safety information
Warning
Using the memory function while driving can lead to unexpected seat or steering wheel movements. Vehicle control could be lost.
There is a risk of accident. Only retrieve the memory function when the vehicle is stationary.
Warning
There is a risk of jamming when moving the seats. There is a risk of injury or risk of damage to property. Make sure that the area of movement of the seat is clear prior to any adjustment.
Overview
.png)
The memory buttons are located on the front doors.
Storing
1. Set the desired position.
2. .png)
Press the button. The writing on
the
button lights up.
3. Press desired button 1 or 2 while the LED is lit. A signal sounds.
Calling up settings
The stored position is called up automatically.
Press the desired button 1 or 2.
The procedure stops when a switch for setting the seat is pressed or one of the memory buttons is pressed again.
Once underway, adjustment of the seat position on the driver's side is disabled after a short while.
READ NEXT:
Massage function
Concept
Depending on the program, the massage function
ensures relaxed muscles and better blood
circulation and can avoid fatigue.
General information
Eight different massage programs can be selected:
Seat heating
Overview
Front
Seat heating
Rear
Seat heating
Switching on
Press the button once for each
temperature
level.
The maximum temperature is reached when
three LEDs are lit.
If the trip is continued w
Active seat ventilation
Concept
Integrated fans in the seat and armrest areas
provide a comfortable seat temperature.
Overview
Active seat ventilation
Switching on
Press the button once for each
ventilation
level.
The hig
SEE MORE:
Gasoline engines
B468/B58 Engine
The B46/B58 engines have two separate coolant circuits. The coolant in the
low-temperature coolant
circuit to cool the charge air. The coolant in the high-temperature coolant
circuit to cool the engine.
The two coolant circuits each have their own expansion tank.
Overview of the
Steering interventions
If the current course of the vehicle deviates too much from the target
trajectory (path curve), a steering
correction is initiated.
The steering intervention is a corrective measure. This means the driver is not
relieved of his duty to
steer the vehicle. As the corrective steering interventions a
