BMW 5 Series Owners & Service Manuals

BMW 5 Series: Entering a destination via address

General information

Enter at least the country and the town/city for the address. Destination guidance is started to the town/city center if no street is entered.

Selecting the state/province

1. Press the button on the Controller.

2. "Classic input".

3. "State/Province".

4. Select the country from the list.

Entering the address

Concept

The address can be entered in any order.

Example: entering the address via the town/city

1. "Classic input".

2. Enter the town/city.

The list is narrowed down further with each entry.

3. Select the symbol.

4. Move the Controller to the right to select the town/city from the list.

5. If necessary, enter the street.

6. Select the street as you would the town/city.

7. If necessary, enter a house number.

8. Select the symbol.

9. Select a house number or range of house numbers from the list.

Starting destination guidance

"Start guidance" or Add intermediate destinations.

Selecting a destination from the contacts

1. Press the button on the Controller.

2. "Contacts".

Contacts are displayed.

3. Select a contact with address.

4. Select the address.

    READ NEXT:

     Received destinations

    General information Depending on the national-market version, the destinations are automatically stored as received destination and can be applied in the destination guidance, if they were transferred

     Planning a trip

    General information When planning a trip, several intermediate destinations can be entered. New trip 1. Press the button on the Controller. 2. Select the type of destination entry. 3. Select a sing

     Stored trips

    General information Up to 30 trips can be stored in the trip list. If necessary, delete existing trips to be able to store new trips. Storing The destination guidance for the tip must be active. 1. P

    SEE MORE:

     Concept, General information, Safety information

    Concept PDC is a support when parking. Objects that you are approaching slowly in front of or behind the vehicle are indicated by signal tones and a display on the Control Display. With Parking Assistant: obstacles on the side of the vehicle that are detected by the sensors of the parking assistan

     Measurement of the tire air temperatures when stationary

    Input and output graphic in the electronic tire pressures label on the G30 Input Output Tire air temperature Ambient temperature Dynamic Stability Control (DSC) Tire pressure output Central Information Display (CID) In the case of wheel electronics that have already been taught-in, the

    © 2019-2025 Copyright www.bmw5g30.com