BMW 5 Series: Planning a trip
General information
When planning a trip, several intermediate destinations can be entered.
New trip
1.
Press the button on the
Controller.
2. Select the type of destination entry.
3. Select a single destination.
4. Enter an intermediate destination.
Intermediate destinations
General information
Before entering an intermediate destination, an individual destination must be set.
A maximum of 30 intermediate destinations can be entered for one trip.
Entering an intermediate destination
1.
Press the button on the
Controller.
2. Move the Controller to the right.
3. 
"Add a stop".
4. Select the type of destination entry.
5. Enter an intermediate destination.
6. "Start guidance".
Sort intermediate destinations
The order of the intermediate destinations can be adjusted. Starting from the second intermediate destination, the list of intermediate destinations will be displayed automatically after a new intermediate destination has been entered.
1. 
Press the button on the
Controller.
2. 
"Destination options".
3. "Sort destinations".
Adjusting the intermediate destinations
1. Press the button on the
Controller.
2. "Destination options".
3. Mark intermediate destination.
4. 
Press the button.
5. Select the desired setting:
- "Add to favorites": store intermediate destination as Favorite.
- "Delete entry": delete the intermediate destination.
READ NEXT:
Stored trips
General information
Up to 30 trips can be stored in the trip list. If necessary,
delete existing trips to be able to store
new trips.
Storing
The destination guidance for the tip must be active.
1. P
Map, Destination guidance
Map
Opening the map
The map can be accessed directly
with the
button on the Controller.
Overview
General information
The map can be used via iDrive.
Basic entry explanation, refer to the Owner's
Man
SEE MORE:
Showroom mode
The Showroom mode enables you to view the various instrument cluster displays
and the Head-Up
Display during a "virtual" journey.
The Showroom mode is started via the test functions of the instrument cluster.
The following steps must be followed:
Activate the PAD mode (press the start/stop butt
Control units on the MOST bus
Head unit
Head unit
On the G30, the head unit can be operated by touch at the CID in addition to
operation via the
controller. In the case of optional equipment with gesture control, selected
functions can also be
operated by means of gestures.
Hi-fi amplifier with MOST bus
The following amplifie
