BMW 5 Series: Concept, General information, Safety information
Concept
The system provides assistance in parking and
maneuvering. The area around the vehicle is
shown on the Control Display.
General information
Several cameras capture the area from different
selectable perspectives. In addition, assistance
functions, for instance guidelines, can be faded
into the display.
The following camera perspectives can be displayed:
- Automatic camera perspective: the system shows the camera
perspective suitable for the respective driving
situation.
- Rearview camera: for representing
the areas behind the vehicle.
- Right-hand and left-hand side view: for representing the areas on the
sides of the vehicle.
- Camera perspective movable via iDrive.
- Panorama View: to
present cross traffic, for instance at junctions
and driveways, depending on the currently
engaged gear.
Depending on the view, the environment around
the vehicle or a part of it is depicted.
Safety information
Warning
The system cannot serve as a substitute for the
driver's personal judgment in assessing the
traffic conditions. There is a risk of accident.
Adjust driving style to traffic conditions. Watch
traffic and vehicle surroundings closely and actively
intervene where appropriate.
READ NEXT:
Buttons in the vehicle
Park assistance button
Panorama View
Cameras
Front camera
Rearview camera
One camera is located at the bottom of each exterior
mirror housing.
The image quality may be impa
Overview
Function bar
Selection window
Side view
Automatic camera perspective
Movable camera perspective
Camera image
Rearview camera
Selection window
The individual camera perspectives can
General information
More than one assistance function can be active
at the same time.
The following assistance functions can be manually
activated:
"Parking aid lines".
"Obstacle marking".
"Ca
SEE MORE:
General information
Enter at least the country and the town/city for
the address. Destination guidance is started to
the town/city center if no street is entered.
Selecting the state/province
1. Press the button on the
Controller.
2. "Classic input".
3. "State/Province".
4. Select the country
Introduction
The terminal control in the G30 is identical to the terminal control of the
G12. In the G30, the vehicle
is always in the right condition from the point of view of the customer. The
terminals are controlled
via a customer-oriented condition management. The terminal control is dependen