BMW 5 Series: Split screen
Concept
Additional information for the navigation can be displayed in the right part of the split screen.
Switching on/off
1. 
Press the button on the
Controller.
2. Move the Controller to the right.
3. 
"Split screen".
4. "Split screen"
Selecting the display
1. 
Press the button on the
Controller.
2. Move the Controller to the right.
3. 
"Split screen".
4. Select the desired setting.
Route preview
Concept
If destination guidance is active, the destination guidance hints can be displayed as list in the split screen.
General information
In the case of multi-lane roads, lane information may indicate the recommended lanes.
The current vehicle position can also be displayed in the lane information Depending on the country-specific version, the display may deviate from what is depicted.
Display
- Turn information
- Upcoming street
- Distance to maneuver
- Lane information
- Current road
READ NEXT:
Navigation data
General information
Navigation data is stored in the vehicle and can
be updated from a USB storage device.
Current navigation data is available from a dealer's
service center or another qualified ser
Quick search
Concept
Depending on the equipment, Points of Interest
and addresses can be searched for by entering a
sequence of letters or by searching in the navigation
data stored in the vehicle.
All entries ar
SEE MORE:
Chain drive
Features:
Chain drive at the side of the engine emitting the forces
Single-part chain drive for driving the camshafts
Single sleeve-type chain 8 mm
Electric motor of the combined oil-vacuum pump via a separate chain
Plastic tensioning and guide rail
Hydraulic chain tensioner with spring
Driver profiles
Concept
In the driver profiles, individual settings for several
drivers can be stored and called up again
when required.
General information
There are three driver profiles with which personal
vehicle settings can be stored. Every vehicle
key has been assigned one of these driver
profiles.
If the v
