BMW 5 Series: Side collision mitigation
BMW 5 Series 2016-2025 Owners Manual / Safety / Side collision mitigation
READ NEXT:
Concept, General information, Safety information
Concept
The system helps to avoid imminent side collisions.
General information
Four radar sensors in the bumpers monitor the
area next to the vehicle in the speed range from
approx. 45 mph/70 km/h t
Overview
Button in the vehicle
Intelligent Safety
Radar sensors
The radar sensors are located in the bumpers.
Front bumper.
Rear bumper.
Always keep the bumper in the area of the radar
sensors clean and un
Warning function
Light in the exterior mirror
If there is a risk of collision
If there is a risk of collision, the light in the exterior
mirror flashes and the steering wheel vibrates.
An active steering interventio
SEE MORE:
Ethernet
On the G30 the 2-wire OABR Ethernet (OPEN Alliance BroadR-Reach) from the G12
is used.
The Ethernet variant with 5 lines (4 data lines and 1 activation line) is still
used on the G30 by the
OBD2 interface to the Body Domain Controller.
Use of 2-wire OABR Ethernet on the G30
The following control
Operation - Active Cruise Control with Stop&Go function
Activation and deactivation
The activation and deactivation of the ACC Stop&Go and the Dynamic Cruise
Control are almost the
same. ACC Stop&Go can either be activated while driving or at a standstill. For
safety reasons, when
the vehicle is at a standstill the function can only be put
© 2019-2025 Copyright www.bmw5g30.com
