BMW 5 Series: Idle state
Concept
If the vehicle is in idle state, it is switched off. All power consumers are deactivated.
General information
The vehicle is in idle state prior to opening from the outside and after exiting and locking.
Safety information
Warning
An unsecured vehicle can begin to move and possibly roll away. There is a risk of accident.
Before exiting, secure the vehicle against rolling.
In order to ensure that the vehicle is secured against rolling away, follow the following:
- Set the parking brake.
- On uphill grades or on a downhill slope, turn the front wheels in the direction of the curb.
- On uphill grades or on a downhill slope, also secure the vehicle, for instance with a wheel chock.
Warning
Unattended children or animals in the vehicle can cause the vehicle to move and endanger themselves and traffic, for instance due to the following actions:
- Pressing the Start/Stop button.
- Releasing the parking brake.
- Opening and closing the doors or windows.
- Engaging selector lever position N.
- Using vehicle equipment.
There is a risk of accidents or injuries. Do not leave children or animals unattended in the vehicle.
Take the vehicle key with you when exiting and lock the vehicle.
Automatic idle state
The idle state is automatically established under the following conditions:
- After several minutes, if no operation takes place on the vehicle.
- If the charge state of the vehicle battery is low.
- Depending on the setting via iDrive, if one of the front doors is opened when exiting the vehicle.
The idle state is not automatically established while a phone call is active.
Establishing idle state when opening the front doors
Via iDrive:
1. "My Vehicle".
2. "Vehicle settings".
3. "Doors/Key".
4. "Turn off after door opening".
Manual idle state
To establish idle state in the vehicle after end of trip:
.png)
.png)
Press and hold the button until
the OFF indicator on the instrument
cluster goes out.
READ NEXT:
Standby state
Concept
When standby state is switched on, most functions
can be used while the vehicle is stationary.
Desired settings can be adjusted.
General information
The vehicle is in the standby state after
iDrive
Concept
The iDrive combines the functions of many
switches. These functions can be operated via
the Controller.
Safety information
Warning
Operating the integrated information systems
and communicatio
Input and display
Letters and numbers
Letters and numbers can be entered using the
Controller or the touchscreen. The keyboard's
display changes automatically.
Change between capital and
lower-case letters.
Insert bla
SEE MORE:
Mobility System
Concept
With the Mobility System, minor tire damage can
be sealed temporarily to enable continued travel.
To accomplish this, sealant is pumped into the
tires, which seals the damage from the inside.
General information
Follow the instructions on using the Mobility
System found on the compressor
Ambient lighting
The ambient lighting includes 6 predefined, selectable light designs.
Adjust the lighting design and the brightness with the controller. The selected
design is displayed on
the CID.
System wiring diagram
Interior lighting, ambient lighting
Ambient lighting, instrument panel, passenger's side
F
