BMW 5 Series: Timeshift
General information
The channel you are currently listening to is stored in a buffer for up to an hour.
Prerequisite: the signal must be available.
The stored audio track can be played with a delay following the live broadcast. When the memory is full, the older tracks are overwritten. The memory is cleared when a new channel is selected or when the vehicle is switched off.
Opening the timeshift function
1. "MEDIA".
2. "SiriusXM".
3. Move the Controller to the right.
4. .png)
"Timeshift".
Time shift forward/reverse
Within the stored recording, it is possible to jump to any point in time.
.png)
Press the button on the radio
or turn
the Controller.
Or depending on the equipment:
.png)
Press the button on the radio
or turn
the Controller.
You can jump to the next or the previous track.
.png)
Press and hold the button on
the
radio.
Or depending on the equipment:
.png)
Press and hold the button on
the
radio.
The recording is spooled forward or back.
Timeshift menu
.png)
Go to the live broadcast.
.png)
Automatic timeshift
deactivated/activated.
.png)
Playback/pause.
Automatic timeshift
With automatic timeshift, audio playback is paused for the following events.
- Incoming and outgoing telephone calls.
- Activation of the voice activation system.
- Muting.
After that, audio playback is continued from the time of the interruption.
1. Move the Controller to the right.
2. .png)
"Automatic timeshift".
READ NEXT:
Smart Favorites
General information
A maximum of 20 channels can be stored as
Smart Favorites.
If a stored Smart Favorite is selected, the current
track will be played from the beginning.
Adding the current channel
Stored stations
General information
Up to 50 stations can be stored.
Selecting a station
1. "MEDIA".
2. "Radio".
3. "Presets".
4. Select the desired station.
Deleting a station
1. "MEDIA".
2. "Radio".
3. "Preset
SEE MORE:
24 V Electronic Power Steering
The greater weight of the engines in the G30 on vehicles with 8-cylinder
engines results in a higher
front axle load. This has the effect that the required power of the steering
assist increases. Due to
these high currents, it is necessary to increase the voltage supply of the EPS
to 24 V.
Digital Motor Electronics (DME)
DME 8 control unit
The 8th generation engine electronics form a common control unit platform for
gasoline and diesel
engines that have been used since modular engines were introduced. Its
appearance is characterized
by a uniform housing and a uniform connector strip. The hardware inside has been
