BMW 5 Series Owners & Service Manuals

BMW 5 Series: Last calls

The last outgoing, missed, and incoming calls are transferred to the vehicle. Depending on the equipment, the calls are transferred from the main phone and additional phones.


1. "COM".

2. If necessary, "Telephone".

3. "Recent calls".

4. The last calls are displayed.

Filtering call list

1. "COM".

2. "Telephone".

3. Select desired filter:

  • With two paired phones, select the desired phone:
    "all telephones"
  • "All calls"
  • "Missed calls"
  • "Incoming calls"
  • "Outgoing calls"

4. Select the desired setting.

Selecting number from list

Select from list. Call is established via the mobile phone, from where the entry originates.

Via options: start call via the second mobile phone.

To cancel: "End call"

Active calls

Adjusting the volume

Turn the volume button on the radio during the call, until the desired volume is reached. The setting is stored for the driver profile currently used.

Volume equalization

The microphone volume of the phone can be adjusted during an active call.

1. "Microphone sensitivity".

2. Set the desired volume.

Call transfer

The relaying of an incoming call is handled through the end-user device with which the call was accepted, for instance with the button on the steering wheel via the hands-free system of the car.

The top priority must be assigned to the telephone, see Owner's Manual for the vehicle.

An ongoing call can be transferred between the vehicle and the end device:

  • "Transfer call to vehicle"
  • "Transfer call to telephone"

Dialing a number

1. "COM".

2. If necessary, "Telephone".

3. "Dial number".

4. Enter the numbers.

5. Select the symbol.

The connection is established via the mobile phone to which this function has been assigned.

Establish the connection via the additional phone:

1. Press the button.

2. "Call via".

Holding, resuming

An active call can be put on hold and resumed later on.

  • "Hold call"
    Call is put on hold.
  • "Resume"
    Call is resumed.

Muting the microphone

When a call is active, the microphone can be muted.

The muted microphone is automatically activated:

  • When a new connection is established.
  • When switching between call parties.

DTMF suffix dialing

DTMF suffix dialing can be used for gaining access to network services or for controlling devices, for instance to make a remote inquiry of an answering machine. The DTMF code is needed for this purpose.

1. "Keypad dialing".

2. Enter DTMF code.


     Calls with multiple parties

    General information You can switch between calls or connect two calls to a single conference call. These functions must be supported by the mobile phone and service provider. Accepting a call while sp

     Hands-free system

    General information Calls that are being made on the hands-free system can be continued on the mobile phone and vice versa. From the mobile phone to the hands-free system Calls that were begun outside

     Additional functions

    General information Depending on the mobile phone and the installed apps, the following contents of the mobile phone are transmitted to the vehicle: Contacts. Short messages. Data transfer can tak


     Rear CD/DVD/Blu-ray player

    CD/DVD/Blu-ray drive CD/DVD/Blu-ray ejection Headphone connection, right USB port, right HDMI/MHL connection USB port, left Headphone connection, left USB interface in the rear There are two USB interfaces in the CD/DVD/ Blu-Ray player in the rear. Properties: USB port Type C. For cha

     Introduction, Display

    Introduction There is only one instrument cluster available with the launch of the G30. The instrument cluster has an 8.8" TFT display and therefore allows for situation-dependent display of information that is relevant to the driver. This flexible display of information achieves a maximum degree

    © 2019-2023 Copyright