BMW 5 Series: Integrated key
General information
The driver's door can be locked and unlocked without the vehicle key using the integrated key.
The integrated key also fits the glove compartment.
Safety information
Warning
For some country versions, unlocking from the inside is only possible with special knowledge.
Persons who spend a lengthy time in the vehicle while being exposed to extreme temperatures are at risk of injury or death. Do not lock the vehicle from the outside when there are people in it.
NOTICE
The door lock is permanently joined with the door. The door handle can be moved. When pulling the door handle with the integrated key inserted, paint or the integrated key can be damaged. There is a risk of damage to property.
Remove the integrated key before pulling the outside door handle.
Removing
.png)
Press the button, arrow 1, and pull out the integrated key, arrow 2.
Locking/unlocking via the door lock
1. Pull and hold the door handle outward with one hand.
.png)
2. Guide one finger of your other hand from the back under the cover and push the cover out.
Use the thumb for counter support to prevent the cover from falling out of the door handle.
.png)
3. Remove the cover.
4. Unlock or lock the door lock using the integrated key.
.png)
The other doors must be unlocked or locked from the inside.
Alarm system
The activated alarm system is triggered when the door is opened, if the vehicle has been unlocked via the door lock.
The alarm system is not switched on if the vehicle is locked with the integrated key.
READ NEXT:
Buttons for the central
locking system
General information
In the event of a severe accident, the vehicle is
automatically unlocked. The hazard warning system
and interior lights come on.
Overview
Buttons for the central locking system.
L
Comfort Access
Concept
The vehicle can be accessed without operating
the vehicle key.
Carrying the vehicle key with you, e.g., in your
pants pocket, is sufficient.
The vehicle automatically detects the vehicle key
Trunk lid
General information
To avoid locking the vehicle key in the vehicle,
do not place the vehicle key in the cargo area.
Depending on the vehicle equipment and country version, it is also possible to
ha
SEE MORE:
System Overview
System wiring diagrams
Bus overview
G30 Bus overview
ACC - Active Cruse Control
ACSM - Advanced Crash Safety Module
AMPT - Top HiFi amplifier
ASD - Active Sound Design
BDC - Body Domain Controller
CON - Controller
DME - Digital Motor Electronics
DME2 - Digital Engine Electronics 2
DSC - Dynamic Sta
Operation
The system is switched on via the Traffic Jam Assistant button on the
multifunction steering wheel
(MFL).
G30 buttons for ACC Stop&Go with Active Driving Assistant Plus optional
equipment (OE 5AT)
Button for activating or deactivating the Active
Lane Keeping Assistant and Traffic Jam
